Last time you lifted for eight repetitions; today you managed nine. Does that count as progress if you did not put another plate on the bar? Under comparable movement and effort conditions, an extra repetition can be useful evidence of change. Adding load also matters, particularly when maximal strength is the goal. Trying to push both numbers at once can blur what changed. One workable approach is double progression: set a repetition range, build toward its upper end at a given load, then consider a small load increase and work through the range again.
This is general programming information for healthy adults, not rehabilitation advice for pain or a medical condition. Do not test a maximal load alone on an exercise that requires safeties, and do not turn a day of illness into a personal-record attempt.
The evidence does not say load is the only progression
In a 2022 trial, 43 people with at least a year of lower-body training experience were assigned to eight weeks of either increasing loads with a relatively stable rep target or increasing repetitions at a stable load. Most measured muscle-thickness, endurance and performance outcomes did not show a notable group difference. A few site-specific or strength outcomes showed modest tendencies. Both strategies were viable in this setting; the study did not establish that repetitions and load are interchangeable for every person and objective.
A separate 2024 trial assigned the two legs of 39 previously untrained young adults to a load-progressing or repetition-progressing leg-extension protocol for ten weeks. Both protocols increased measured vastus lateralis cross-sectional area and leg-extension one-repetition maximum, without a clear between-protocol difference. Results from a beginner’s single-joint exercise should not be copied uncritically to an experienced lifter’s competition squat or bench press.
These studies support the idea that the plate need not be heavier after every workout. They did not specifically test a universal “eight-to-twelve double-progression rule”. The upper-limit step described below is an editorial way to organise the two types of progression. Our guide to overload beyond load and guide to choosing repetitions explain the broader context.
Define the range and a good repetition first
Imagine two working sets of a seated row in a range of eight to twelve reps. That range is illustrative, not a magic optimum for every exercise. Choose a starting load that lets you complete at least eight controlled reps while retaining some reserve. Keep the machine, seat setting, grip, movement range and rest reasonably consistent so later numbers are interpretable.
Decide in advance what “reaching the top” means. Twelve reps in the first set and eight in the second is not twelve in both sets. If all prescribed working sets reach twelve with similar technique and without turning each into an all-out grind, you may consider the smallest practical load increase at the next session. If a machine’s smallest increment is too large, repeating the same load to confirm the performance is reasonable; you are not obliged to make a huge jump.
Repetitions may return toward the lower end after adding weight without representing failure. If you completed two sets of twelve at 35 kg and then two sets of nine at 37.5 kg with the same movement quality, you have started the range at a heavier load. Weight and repetitions do not have to climb simultaneously forever. If the jump drops you far below the lower bound or changes the movement, return to the earlier load or use a smaller increment where possible.
Four-week worked training log
The table is a fictional seated-row example. It extracts comparable main sets from the same weekday in a twice-weekly plan; in practice, record all working sets. Assume the same equipment, seat, range of motion and about two minutes of rest.
| Week | Load | Set 1 | Set 2 | Next decision |
|---|---|---|---|---|
| 1 | 35 kg | 9 reps | 8 reps | Build reps at 35 kg |
| 2 | 35 kg | 11 reps | 9 reps | Let the second set improve |
| 3 | 35 kg | 12 reps | 12 reps | Consider a small increase if form matches |
| 4 | 37.5 kg | 9 reps | 8 reps | Rebuild within 8–12 at the new load |
This is a decision aid, not the result of either trial above. A slow second set in week two could reflect sleep, rest, fatigue or a changed machine setup. Do not discard an entire plan after one flat session. If week three’s “twelve” was achieved by shortening the row, it is not comparable with the earlier sets and need not trigger an increase.
When to prioritise load or repetitions
If maximal strength or a competition lift is your principal goal, practising the relevant heavy loads is important. That does not mean every set must be a near-limit low-rep test. You might use goal-specific loading in a main lift and build repetitions in an accessory movement. For hypertrophy, sustainable volume and sound working sets matter alongside load. Our lighter versus heavier load comparison discusses the differing outcomes.
At a crowded gym, when plates have large jumps or during a week with variable recovery, adding one controlled rep at the same weight may be more feasible. Conversely, if a set has become much longer than your intended practice, a modest weight increase can bring repetitions back into the chosen range. Judge trends across several matched sessions, not a single workout.
TRAINING PRESS and GROWTH are both operated by GOODBOY STUDIOS. In GROWTH, record the exercise, load, repetitions and sets, and note equipment setup and movement range. Then you can see whether all sets actually reached your chosen upper end. We do not claim the app automatically prescribes an optimal load.
Common questions
My first set hit twelve. Should I raise the load?
In this example, review every working set and movement quality. If the second set is near the lower end, there is no need to rush.
I added weight and did fewer reps. Did I regress?
Not necessarily. If you are still in the planned range with comparable technique, you began a new round at a heavier load. Reassess if you fall well below the range or have pain.
Must I progress every week for muscle growth?
Short-term records fluctuate. Review training, recovery and technique over weeks rather than inferring body changes from one stalled session.
Takeaway
You need not treat reps and load as an either-or decision every workout. Trials show that both routes can produce adaptation under particular conditions; the appropriate emphasis depends on your goal. Choose a rep range, reach its upper end across working sets under repeatable conditions, then consider a manageable load increment. Record movement quality as well as the numbers.
References
- Plotkin D, et al. Progressive overload without progressing load? The effects of load or repetition progression on muscular adaptations. PeerJ. 2022;10:e14142. doi:10.7717/peerj.14142. https://pubmed.ncbi.nlm.nih.gov/36199287/
- Chaves TS, et al. Effects of Resistance Training Overload Progression Protocols on Strength and Muscle Mass. International Journal of Sports Medicine. 2024;45:504–510. doi:10.1055/a-2256-5857. https://pubmed.ncbi.nlm.nih.gov/38286426/



